Object Basic Guide

1. Object

   The object layer is placed below the avatar, so if the impassible tile effect is not used, avatars will be able to walk over it.

2. Top Object

   The object layer is placed above the avatar and other objects. This allows top objects to be placed on top of objects (such as a computer on a table) and if the impassible tile effect is not used, avatars will walk under it.

• You can set the Text Objects as you wish.

  • You can set the text in various colors.

  • You can conveniently adjust the size of the text.

    • You can adjust the text size from the panel, and it is also possible through Object Size Adjustment.

  • After placing the text object on the map, you can modify it by clicking the gear icon.

  • Text objects cannot have detailed object settings.

You can upload image files from your computer to use as objects.

1. Click on Objects in the top panel.

2. Click the + Add button in the My Objects tab on the right panel.

3. Select the file you want to use from your computer.

4. Your new object should appear in the My Objects tab, ready for use.

You can download and use objects uploaded by others.

If you want to use a wider variety of objects, consider exploring the Asset Store.

1. An empty heart appears when you hover your cursor over an object.

2. Click the heart and the Favorites section will appear in the panel.

3. Click the filled heart to remove it from your favorites.

1. Place an object on the map using Stamp.

2. Object Settings Management

   • In stamp mode, click the gear icon at the top left to switch to the selection tool, where you can manage object settings.

   • To change the settings of an already placed object, select the selection tool and then click the gear icon.

3. The Object Settings panel will open on the right.

1. Click the gear icon of the object you want to resize using the selection tool.

2. Find the size adjustment options in the panel at the bottom right of the screen.

3. Size Input

   • W: Enter the horizontal length.

   • H: Enter the vertical length.You can adjust the object's size by entering the numbers.

4. The number input fields can be adjusted either by keyboard input or by clicking with the mouse.

1. Click the gear icon of the object whose position you want to adjust using the selection tool.

2. Find the position adjustment options in the panel at the bottom right of the screen.

3. Enter numbers in the X and Y values to move the object.

4. Entering a number in the X field will move the object to the right, while entering a number in the Y field will move it down.

By adding detailed settings to the object, you can enable interactions with it.

You can set the interaction range of the object.

Try adjusting the number in the object interaction range to see the difference!

You can set objects to trigger automatically or by pressing F.

• [Press F to Trigger]: The object settings will apply when you press the F key!

• [Automatically Trigger]: The object will trigger as soon as it enters the execution range!

Using the select tool, you can rotate, flip, and delete objects using the shortcut even after installing them.

You can move individual or multiple selected objects.