Power On
Touch and hold the power button (⏻) for about 1–2 seconds until you hear a beep and the control panel lights up.
Select a Burner
Touch the icon for the burner you want to use (left, center, or right).
The heat level number next to it will start blinking.
Adjust the Heat Level
Use the ‘+’ and ‘–’ buttons or slide your finger along the bar to set the heat level (typically 1–9 or 1–10 levels).
Turn Off a Burner or All Burners
Set the heat level to ‘0’ or touch and hold the power button to turn everything off.
Make sure your hands are completely dry before touching the panel.
Wipe off any water, oil, or dust on the glass surface.
Touch each button for at least 1 second—don’t tap too quickly.
For slide-type controls, move your finger smoothly across the slider—don’t tap individual points.
If the child safety lock is on, the cooktop will not respond. You must press and hold the lock icon () for 3–5 seconds to unlock it.
If a lock icon () or “L” appears on the panel:
→ Touch and hold the lock icon for 3 to 5 seconds to disable it.
If you see “H” or “h” on the panel, it means the burner is still hot—do not touch.
The cooktop will automatically turn off after extended periods of inactivity.
Make sure to use cookware with flat, wide bottoms—if it’s too small or not centered, the burner may not activate.